Step 2: Insert the Allen wrench into the small opening on the TOP/PASSENGER'S side of the belt tensioner (which is next to the radiator).
Step 3: Turn the belt tensioner CLOCKWISE to release the tension on the belt, allowing for its removal.
Step 4: Using the belt diagram posted near the radiator, on the UNDERSIDE of the hood, or in the owner's manual, route the belt around the proper pulleys.
Step 5: Once the belt is in place, secure it by turning the belt tensioner/Allen wrench COUNTER CLOCKWISE.
NOTE: The belt should be taut, but not stretched or overly tight!
These Part Change / Installation Instructions Apply to
0 Beetle Serpentine Belt Replacement Instructions
