Buick Century Air Flow Sensor Replacement Instructions, Install, Change ()

Tools required:

Flathead screwdriver

Step 1: Remove the intake hose.

Remove the two clamps, one by the engine and one by the air box.

Step 2: Unclip the harness from the air flow sensor.

Step 3: Loosen the clamp that holds the air flow sensor in place.

Step 4: Using the screwdriver, pry the sensor from the air hose.

Step 5: Place the clamp onto the air box BEFORE replacing the air flow sensor component.

Be sure that there are no folds or obstructions when putting the sensor in place.

Step 6: Put the new air flow sensor into place.

Step 7: Reattach the air flow hose.

Be sure to line up the two arrows on the hose, as they are your guide to ensure proper placement.

Step 8: Tighten the clamps, securing the component.

How do you Change, Replace, or Install Buick Century Air Flow Sensor Replacement