Step 1: Open the vehicle's trunk to expose the interior panel protecting the tail light assembly.
Step 2: Using a flathead screwdriver, remove the holding tab in the center of the interior panel.
Step 3: Unscrew the hand-bolt and remove the trunk's liner near the tail light.
Step 4: Unscrew the 2 remaining hand-bolts that are beneath the trunk liner.
Step 5: With a few light taps, you can now loosen and remove the tail light assembly from the vehicle.
Step 6: Gently unplug the electrical plug that connects the lighting assembly to the vehicle's electrical system.
Step 7: Plug your new tail light assembly into the electrical plug of the vehicle.
Be sure that you hear the electrical plug "snap" into place.
Step 8: Using the alignment pin and the 3 screws, you can now put the new tail light in place.
Step 9: Reconnect the 3 hand-bolt connectors.
The first two will be directly against the frame/lighting area. The final one will secure the trunk liner into place.
NOTE: The hand-bolt that secures the "cargo net" into place will be different from the other two! This one is the hand-bolt that is outside the trunk liner!
Step 10: Replace the clip that secures the interior panel.
It should simply "snap" into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: