Step 2: Using the flathead screwdriver, remove the trim panel near the tail light's mounting area.
Step 3: Disconnect the wiring harness from one or both of the brake lights (depending on your repair).
Step 4: Using the 10mm wrench, remove the 3 bolts that secure the brake light.
Step 5: You can now remove the brake light from the vehicle.
Be sure to remove the plastic casing that is inside the mounting area.
Step 6: Mount the new tail light by inserting it, aligning the plastic casing, and securing it by tightening the three 10mm mounting bolts.
Step 7: Connect the wiring harness to the back of the tail light.
Step 8: Reattach the plastic trim cover.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
