Step 2: Loosen and remove the two 10mm mounting bolts that secure the headlight assembly to the vehicle.
Step 3: Disconnect the wiring harness from the headlight assembly.
Step 4: You can now remove the headlight from the vehicle.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs and sockets, as most of our models do. This saves you an installation step! However, if your particular model doesn't, simply remove the socket retaining ring by turning it counter-clockwise, remove the sockets/bulbs from the assembly, and attach them to the new headlight. This process takes just a few moments!
Step 5: Connect the wiring harness to the new headlight assembly.
Step 6: Mount the headlight by tightening the two 10mm mounting bolts.
Use the guiding tabs on the headlight to ensure proper installation.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
