Step 1: Open the truck's tailgate to expose the bolts holding the tail light assembly in place.
Step 2: Loosen the retaining bolts.
Using the 10mm socket, loosen the two bolts that hold the assembly in place.
Step 3: The assembly can now be removed from the vehicle (with slight pressure).
Step 4: Un-plug the electrical connection from the truck to the tail light casing.
Step 5: Connect the truck's electrical plug to the corresponding plug with the new tail light assembly.
Be sure that the plug "snaps" into place to ensure a secure connection.
Step 6: Using the alignment pins as your guide, snap the new tail light assembly into place.
Step 7: While holding the light assembly in place with one hand, begin tightening the two retaining bolts to secure the tail light assembly's connection to the vehicle.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
