Step 2: Loosen and remove the three 8mm bolts located on top of the headlight assembly.
Step 3: You can now slide the headlight assembly from the vehicle.
Step 4: Disconnect the wiring harnesses attached to the back of the headlight assembly. You will need to disengage the wiring bundle from the headlight. It is held on by a small clip.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments!
Step 5: Connect the wiring harness to the back of the new headlight assembly, and attach it via the retaining clip.
Step 6: Mount the new headlight assembly by tightening the three 8mm retaining bolts.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
