Step 2: Loosen and remove the Phillips screws (2) located inside the interior door pull.
Step 3: Lift and remove the window control switch-plate. Disconnect the wiring harnesses (3) from the underside of this switch-plate.
Step 4: Loosen and remove the Phillips screw (1) inside the interior door handle.
Step 5: Pry and remove the interior door handle's bezel.
Step 6: Pry and remove the small trim panel covering the side mirror's mounting area.
Step 7: You can now pry and remove the interior door panel from the door frame.
NOTE: If any retaining clips stayed with the door, pry and remove them. Reattach them to the interior door panel.
Step 8: Disconnect the speaker's wiring harness (1).
Step 9: To reattach the interior door panel, reconnect the speaker's wiring harness (1), pull the wiring harnesses through the opening in the door, and with a firm “strikeâ€, “snap†all of the retaining pins back into place.
Step 10: Reattach the trim panel covering the side mirror's mounting area.
Step 11: Reattach the interior door handle's bezel.
Step 12: Tighten the Phillips screw (1) inside the door handle.
Step 13: Reconnect the wiring harnesses (3) to the underside of the power window switch-plate. Move this panel back into position, and tighten the Phillips screws (2) inside the interior door pull.
These Part Change / Installation Instructions Apply to
12 2012, 11 2011, 10 2010, 09 2009, 08 2008, 07 2007, 06 2006, 05 2005, 04 2004 Chevrolet Colorado Front Door Panel (Interior) Replacement Instructions
