Step 2: Loosen and remove the Phillips screw located next to the tail light.
This screw is exposed by opening the trunk.
Step 3: Loosen and remove the thumb-screw that holds the trunk liner in place (over the tail gate mounting area). Pull the trunk liner back to expose the tail light mount.
Step 4: Loosen and remove the thumb-screws (2) that hold the tail light to the vehicle.
Step 5: You can now pull the tail light assembly from the vehicle.
Step 6: Disconnect the tail light's wiring harness.
Step 7: Connect the wiring harness to the new tail light assembly.
Step 8: Mount the tail light by tightening the thumb-screws (2).
Step 9: Cover the area with the trunk liner and secure it by tightening the thumb-screw.
Step 10: Tighten the Phillips mounting screw.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
