Step 2: Using the flathead screwdriver, remove the two retaining pins exposed by the removal of the tail light assembly.
To remove these pins, simply pry on the center of the pin. Once you pull it up, the pin is disengaged and can be removed.
Step 3: You can now remove the tail light.
Step 4: Disconnect the wiring harness from the back of the assembly.
NOTE: If you ordered your replacement tail light from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply remove the existing sockets and attach them to the new tail light. This process takes just a few moments!
Step 5: Connect the tail light's wiring harness.
Step 6: Using the guiding tab for reference, insert the tail light into place and secure it by re-engaging the 2 retaining pins.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
