Step 2: Loosen and remove the two 10mm mounting bolts located on top of the headlight assembly.
Step 3: You can now pull the headlight from the vehicle.
It will take a firm "tug"!
Step 4: Disconnect the wiring harnesses attached to the headlight assembly.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments!
Step 5: Connect the wiring harnesses to the new headlight.
Step 6: Move the headlight into position, and secure it by tightening the 10mm mounting bolts.
Use the guiding pins to ensure proper placement during installation.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: