Step 2: Lift the two retaining tabs that hold the headlight assembly in place.
Step 3: You can now pull the headlight from the vehicle.
Step 4: Disconnect the wiring harnesses from the back of the headlight assembly.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs and sockets, as most of our models do. This saves you an installation step! However, in case your particular model doesn't include new bulbs, simply turn the sockets counter-clockwise, pull them from the assembly, and insert them into your replacement headlight. You will need a Phillips screwdriver to remove one of the bulbs!
Step 5: Connect the wiring harnesses to the back of the new headlight assembly.
Step 6: Move your new headlight assembly into position, using the guiding tabs to ensure proper placement.
Step 7: Secure the new headlight assembly by re-engaging the retaining clips.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
