Step 1: From under the front-end of the vehicle, disconnect the wiring harness attached to the back of the fog light assembly.
NOTE: For bulb replacement only, simply turn the socket counter clockwise and pull the bulb from the assembly. If you are replacing the entire component due to front-end damage or wear and tear, proceed to step 2.
Step 2: Locate and remove the 3 T25 Torx screws that hold the assembly in place.
Step 3: You can now pull the assembly from the vehicle.
NOTE: If you ordered your replacement fog light assembly from Go-Part.com, it likely includes a new bulb, as many of our models do! However, in case it doesn't, you can easily transfer the old bulb/socket from the broken assembly and attach it to the new one!
Step 4: Mount the new fog light assembly to the vehicle by tightening the 3 T25 Torx bolts.
Step 5: Attach the wiring harness to the back of the new fog light assembly.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
