Step 2: Using the flathead screwdriver, disengage the retaining pin (1) near the hood hinge on the PASSENGER'S side of the vehicle.
To release this pin, depress the center of the pin, and pry it free from the vehicle.
Step 3: Lift the weather-stripping up just enough to access the cabin air filter trim panel.
Step 4: Pry and lift the cabin air filter trim panel, exposing the cabin air filter.
NOTE: You may have to pry the panel free from the foam retaining block near the lower corner of the panel.
Step 5: Pull the retaining clips (2) from the cabin air filter assembly, and slide the air filter (1) from the assembly.
Step 6: Insert the new cabin air filter (1) into the assembly, and secure it by re-engaging the retaining clips (2).
Step 7: Reattach the trim panel and weather-stripping.
Step 8: Re-engage the retaining pin (1) to finalize the project.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: