Step 2: Loosen and remove the 3 T10 Torx screws exposed by opening the trunk.
These screws are along the tail light assembly's inner edge.
Step 3: You can now pull the tail light assembly from the vehicle.
Step 4: Disconnect the wiring harnesses from the tail light.
Some models may require turning the sockets counter-clockwise and removing them from the old assembly. You can easily attach them to the new assembly.
Step 5: Connect the wiring harnesses to the new tail light assembly.
Step 6: Mount and secure the tail light by tightening the three T10 Torx screws.
Use the guiding tabs on the assembly to ensure proper installation.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
