Step 2: Using the flathead screwdriver, gently pry the triangular trim panel away from the mirror's mounting point.
Step 3: Disconnect the mirror's wiring harness.
Step 4: Using the 10mm socket, loosen and remove the 3 mounting bolts that hold the mirror to the vehicle.
NOTE: Be sure to hold onto your mirror as you loosen the bolts, as you don't want to have to clean up broken glass from your garage floor or driveway!
Step 5: You can now remove the side mirror.
Step 6: Mount the new side mirror by tightening the three 10mm retaining bolts.
Be sure to feed the wiring through the opening in the door frame!
Step 7: Connect the side mirror's wiring harness.
Step 8: Reattach the trim panel.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
