Step 2: Loosen and remove the Phillips screws (2) inside the interior door pull.
Step 3: Using the flathead screwdriver, pry and remove the power mirror switch. Disconnect the wiring harness attached to the underside of the switch.
Step 4: Lift and remove the window control switch-plate.
Step 5: Disconnect the wiring harnesses (2) from the underside of the switch-plate.
Step 6: Using the flathead screwdriver, GENTLY pry the retaining tabs to remove the power window switch.
Step 7: “Snap†the new power window switch into the switch-plate.
Step 8: Connect the wiring harnesses (2) to the underside of the window control switch.
Step 9: Reattach the switch-plate by tightening the Phillips screws (2).
Step 10: Reconnect the wiring harness for the power mirror switch, and “snap†it back into position on the switch-plate.
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003 Saturn Ion Power Window Switch Replacement Instructions
