Step 2: Turn the retaining rods located behind the headlight assembly and pull them from the vehicle.
Step 3: By sliding the headlight toward the outside of the car, you can then pull it from the front of the vehicle.
Step 4: Disconnect the wiring harness on the back of the assembly.
Step 5: You can now fully remove the headlight assembly from the vehicle.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not include bulbs, simply burn the sockets counter-clockwise, remove them from the old assembly, and attach them to the new one. This process only takes a few moments!
Step 6: Connect the wiring harness to the back of the new headlight assembly.
Step 7: Mount the headlight by securing the mounting rods.
Insert the rods and then turn the handle securely beneath the mounting lip.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: