How do you Change, Replace, or Install 2003-2007 Saab 9-3 Front Bumper Cover Replacement
Click here for all of our other replacement guides
8mm socket/ratchet with extension
Step 1: Open the vehicle's hood.
Step 2: Using the flathead screwdriver, pry and remove the retaining pins (6) that line the TOP of the radiator grille/bumper cover.
Step 3: Loosen and remove the 8mm bolts (3 per side) inside the wheel wells.
Step 4: Loosen and remove the 8mm bolts (3) that line the UNDERSIDE of the front bumper cover.
Step 5: You can now PULL and remove the front bumper cover from the vehicle.
Step 6: Disconnect the wiring harnesses (2) from the backside of the front bumper cover.
Step 7: Using pliers, squeeze the hose clamp to separate the hose from the front bumper cover.
Step 8: To attach the bumper cover, clamp the hose to the new cover. Also, be sure to connect the wiring harnesses (2).
Step 9: Move the bumper cover into position. Tighten the 8mm bolts (9) to secure it to the bumper.
Step 10: Re-engage the retaining pins (6) that line the top of the radiator grille/bumper cover.
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003 Saab 9-3 Front Bumper Cover Replacement Instructions
- POPULAR GUIDES: SAAB 9-3 -
Saab 9-3 Tail Light Replacement
2003-2011 Saab 9-3 Front Door Panel (Interior) Replacement
2003-2011 Saab 9-3 Front Power Window Regulator Replacement
2003-2011 Saab 9-3 Rear Door Panel (Interior) Replacement
2003-2011 Saab 9-3 Side Mirror Replacement
2003-2009 Saab 9-3 Cabin Air Filter Replacement
1999-2003 Saab 3 Engine Air Filter Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
Enter email address here: