Step 1: Using the screwdriver, disengage the grille's retaining clips and pull it from the vehicle.
There are clips along the top of the grille and a couple behind it. They disengage easily, but be sure not to break them, as they are plastic!
Step 2: Using the flathead screwdriver, lift and release the two tabs that hold the headlight assembly in place.
One tab is on top of the assembly near the radiator, the other is just beneath the hood frame on the outer edge of the assembly.
Step 3: You can now pull the headlight assembly from the vehicle.
Step 4: Disconnect the wiring harnesses on the back of the headlight, and completely remove it.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, in case your particular model does not include the bulbs, pull the sockets from the old assembly and attach them to the new one. This process takes just a few moments!
Step 5: Connect the wiring harnesses to the back of the new headlight assembly and re-engage the retaining clips to secure its position.
Step 6: Reattach the grille by engaging the retaining clips.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
