To do so, lift the interior door handle, exposing a T40 Torx screw. Remove this screw. Locate and remove the 4 Phillips retaining screws that hold the door panel in place. Pry up on the electric switch-plate (that powers your electric windows) and disconnect the wiring harnesses attached to the back. You can now lift and remove the interior door panel.
Step 2: Disconnect the wiring harness attached to your side mirror.
Step 3: Using the 10mm socket, remove the 3 retaining bolts that secure your mirror to your door.
Step 4: Using the flathead screwdriver, depress the tabs to release the mirror from the door.
NOTE: Be sure to have a hand on the mirror as you are releasing the tabs! While you may be replacing it, you don't want to clean up the mess of a shattered side mirror, either!
Step 5: Attach the new side mirror to the door by snapping the small tabs into place and tightening the three 10mm bolts.
Step 6: Connect the wiring harness to the new side mirror.
Step 7: Reattach the interior door panel by simply reversing the removal process.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: