Step 1: Locate the blower fan below the glove compartment on the passenger's side of the vehicle.
Step 2: Remove the 8mm/T20 bolts that hold the motor in place (there are 3 of them).
Step 3: Pull the blower motor from the vehicle and disconnect the wiring harness from the back of the component.
Step 4: Secure the new blower motor by tightening the three 8mm/T20 retaining bolts.
Step 5: Connect the wiring harness to the replacement blower motor.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: