Step 2: Using the flathead screwdriver, disengage and remove the retaining pins (6) that line the top of the bumper cover/radiator grille.
To remove these pins, simply pry UP on the center. This allows the clip to be removed.
Step 3: Loosen and remove the 8mm bolt (2 – 1 per side) located inside the wheel well.
Step 4: Loosen and remove the 10mm bolts (4 – 2 per side) located on the UNDERSIDE of the front bumper cover.
Step 5: Disengage and remove the retaining pins (2) located on the UNDERSIDE of the front bumper cover.
Step 6: You can now PULL and remove the front bumper cover from the vehicle.
Step 7: To reattach the front bumper cover, simply “snap†the cover into place. Secure it by first tightening the 8mm bolts (2) and 10mm bolts (4).
Step 8: Re-engage the retaining pins (8) to finalize the installation.
These Part Change / Installation Instructions Apply to
06 2006, 05 2005, 04 2004, 03 2003, 02 2002 Honda CR-V Front Bumper Cover Replacement Instructions
