Step 2: Disengage the two retaining clips located on the top of the headlight assembly.
Step 3: You can now pull the headlight assembly from the vehicle.
Step 4: Disconnect the wiring harnesses on the back of the headlight assembly to completely remove it.
Step 5: Loosen the two 6mm retaining bolts that hold the parking light assembly in place.
Step 6: You can now pull the parking light assembly from the vehicle.
Step 7: Disconnect the wiring harness from the back of the parking light.
Step 8: Connect the wiring harness to the back of the new parking light assembly and move it into place.
Step 9: Secure the parking light by tightening the two 6mm retaining bolts.
Step 10: Reattach the headlight wiring harnesses and lock it into place by engaging the two retaining clips.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: