Step 1: Lift the hood and remove the three retaining screws that hold the assembly in place.
Step 2: Remove the headlight assembly from the vehicle.
NOTE: If you purchased your replacement headlight from Go-Part.com, it may have all of the bulbs included with the part. If so, you won't have to remove the bulbs, and can replace everything with fewer steps!
Step 3: Disconnect the electrical harnesses from the back of the old headlight assembly.
Step 4: Connect the electrical harnesses to the back of the new headlight assembly and move it into position.
Step 5: Tighten the three retaining bolts to secure the new headlight assembly into place.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003, 02 2002, 01 2001 Chrysler Town & Country Headlight Replacement Instructions
