Step 1: On the lower grille area (just beneath the bumper cover), pull the release tab to remove the trim panel that covers the fog light area.
Step 2: Loosen and remove the 3 Phillips retaining screws that hold the fog light assembly in place.
Step 3: Pull the fog light from the vehicle and disconnect the wiring harness on the back of the fog light assembly.
Step 4: You can now remove the fog light completely.
NOTE: If you ordered your replacement fog light from Go-Part.com, it likely includes a new bulb, as most of our models do. This saves you an installation step! However, in case your particular model does not include a new bulb, simply remove the bulb/socket from the old assembly and attach it to the new one!
Step 5: Connect the wiring harness to the back of the new fog light assembly.
Step 6: Secure the fog light assembly by tightening the 3 Phillips retaining screws.
Step 7: Reattach the small trim panel below the bumper cover.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
