Step 1: Gently pull down on the plastic panel that covers the blower motor mounting area beneath the glove compartment on the passenger's side of the vehicle. Remove this panel.
Step 2: Disconnect the wiring harness from the blower motor.
Step 3: Loosen and remove the 3 mounting screws that hold the blower motor in place.
Step 4: You can now remove the blower motor from the vehicle.
Step 5: Secure the new blower motor by tightening the 3 retaining screws.
NOTE: Be sure that the wiring does not get pinched while inserting the blower motor!
Step 6: Connect the wiring harness to the blower motor.
Step 7: Reattach the plastic panel by re-engaging the plastic retaining clips and securing it into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: