Step 1: Remove the three Phillips screws to allow you to slide the panel (located on the rear of the fog light mount, in the tire well) out of the way, giving you access to the back of the fog light mount.
Step 2: Loosen and remove the 7mm bolts that secure the fog light mount in place.
Step 3: You can now pull the fog light from its position.
Step 4: Disconnect the wiring harness from the back of the fog light assembly.
Step 5: Connect the wiring harness to your replacement fog light assembly.
Step 6: Tighten the 7mm bolts and mount the fog light securely.
Step 7: Tighten the Phillips screws that hold the protective panel in place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: