Step 1: Locate the panel that covers the blower motor mounting area.
The panel is beneath the glove compartment on the passenger's side of the vehicle.
Step 2: Using the flathead screwdriver, you can pull the center of pin out, disengaging it. Do this for both retaining pins.
Step 3: Remove the panel.
Step 4: Disconnect the wiring harness from the blower motor.
Step 5: Loosen and remove four 7mm retaining bolts that hold the blower motor in place.
Step 6: You can now pull the blower motor from the vehicle.
Step 7: Insert the blower motor into position, and tighten the four 7mm retaining bolts.
Step 8: Connect the component's wiring harness.
Step 9: Reattach the interior panel by re-engaging the retaining pins.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: