Step 2: Remove the hand-pin that holds the trunk liner in place.
This pin is located just inside the trunk, behind the tail light assembly.
Step 3: Gently pull the trunk liner away from the tail light assembly.
Step 4: Locate and remove the three 11mm retaining bolts.
They are the bolts that hold the tail light assembly to the vehicle's chassis.
Step 5: Disconnect the wiring harnesses on the back of the assembly.
Step 6: You can now pull the tail light assembly from the vehicle.
Step 7: Connect the wiring harnesses to the back of your new tail light assembly.
Step 8: Move it into position, and tighten the assembly into place by tightening the three 11mm retaining bolts.
Step 9: Cover the area by moving the trunk liner into place and securing with the hand-pin.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
