Step 2: Using the Phillips screwdriver, turn the retaining pin slightly. Pry it out with the flathead screwdriver.
This retaining pin is located just above the headlight assembly, where the parking light meets the headlight.
Step 3: With a firm tug, you can now pull the parking light from the vehicle.
Step 4: Disconnect the wiring harness from the back of the parking light.
Step 5: Connect the wiring harness to the parking light.
Step 6: Using the guiding tabs to ensure proper placement, insert the new parking light assembly into position.
Step 7: Secure the parking light assembly by re-engaging the retaining pin.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
