Step 1: From beneath the vehicle, disconnect the side marker light's wiring harness.
NOTE: Not all models use wiring plugs for the side marker lights. If this is the case for your particular model, simply turn the socket/bulb counter-clockwise and remove it from the assembly.
Step 2: Loosen and remove the 13mm bolts (2) that hold the side marker light in place.
Step 3: You can now PUSH the marker light through the FRONT of the bumper cover.
Step 4: Mount the new side marker assembly by tightening the 13mm mounting bolts (2).
Step 5: Connect the side marker light's wiring harness.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
