Step 2: Remove the headlight by removing the retaining bolts, removing the assembly, and disconnecting the wiring harness.
NOTE: If you are replacing the parking light assembly due to damage or wear, it may be a great time to replace the headlight assemblies, as well. After all, you already have them disengaged and removed from your car!
Step 3: Disengage the retaining clip and remove the parking light assembly from the vehicle.
Step 4: Disconnect the wiring harness and fully remove the parking light from the vehicle.
Step 5: Connect the wiring harness to the back of your new parking light assembly.
Step 6: Secure the parking light into place by engaging the retaining clip.
Step 7: Reattach your headlight by reversing the removal steps.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
