Step 2: Remove the 4 hand-screws located inside the trunk.
Step 3: Pull back the trunk liner to expose the back of the tail light assembly.
Step 4: Remove the final hand-screws that secure the tail light assembly to the vehicle's frame.
Step 5: Disconnect the wiring harness from the back of the tail light assembly.
NOTE: If your replacement tail light assembly has bulbs, you can simply connect the wiring harness and install it. However, if it doesn't, simply turn the bulb sockets counter-clockwise to remove them, and attach them to the new tail light assembly.
Step 6: Connect the wiring harness to the new tail light assembly.
Step 7: Secure the new assembly by tightening the hand-screws.
Step 8: Replace the trunk liner and secure it by tightening the hand-screws.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: