Step 2: Remove the 2 mounting plugs that hold the plastic trunk panel in place. Remove the panel, exposing the mounting area.
Step 3: Remove the three 10mm mounting nuts that hold the tail light to the vehicle.
Step 4: You can now remove the tail light assembly.
Step 5: Disconnect the wiring harnesses from the back of the tail light assembly.
NOTE: If you ordered your replacement tail light from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist the sockets counter-clockwise, remove them from the old assembly, and attach them to the new one. This process only takes a few moments!
Step 6: Connect the wiring harness to the new tail light assembly.
Step 7: Mount the tail light by tightening the 10mm bolts to the assembly's mounting studs.
Step 8: Cover the area with the plastic panel and secure it with the mounting plugs.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: