Step 1: Loosen and remove the 7/32 retaining bolts and 5/16 retaining bolts (3) that hold the protective undercarriage panel in place. Remove this panel.
Step 2: Disconnect the fog light's wiring harness.
Step 3: Loosen and remove the Phillips screws (3) that hold the fog light assembly in place.
Step 4: You can now remove the fog light assembly.
Step 5: Mount the new fog light assembly by tightening the Phillips mounting screws (3).
NOTE: With a Phillips screwdriver, you can adjust the bulb's alignment screw.
Step 6: Connect the wiring harness to the back of the fog light assembly.
Step 7: Reattach the undercarriage panel by tightening the 7/32 and 5/16 mounting bolts.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: