Step 2: Disconnect the cooling fan's wiring harness.
Step 3: Loosen and remove the two 8mm mounting bolts that secure the cooling fan to the radiator.
These bolts are located on the upper side of the cooling fan assembly - one on each side.
Step 4: Loosen and remove the 8mm bolt that holds the coolant tank in place (just above the radiator).
Step 5: Lift the coolant overflow tank off of the radiator area, and move it to the side. This gives you some extra room!
Step 6: You can now lift and remove the cooling fan assembly.
This may take some maneuvering, as there isn't much space, but with some work, you can easily get it out of the engine compartment.
NOTE: Be sure not to damage any of the radiator hoses during removal!
Step 7: Move the new cooling fan assembly into position and mount it by tightening the two 8mm mounting bolts. Be sure to reattach the lower radiator hose to the small hook that is provided on the fan assembly.
NOTE: Use the guiding tabs on the bottom of the cooling fan to ensure proper placement.
Step 8: Reattach the coolant overflow tank by tightening the 8mm retaining bolt.
Step 9: Connect the cooling fan assembly's wiring harness.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
