Step 2: Remove the two 10mm retaining bolts located on the top of the headlight assembly.
Step 3: Gently pull the headlight assembly free from the vehicle.
There are retaining clips that hold it in place, so it may take a bit of maneuvering.
Step 4: Disconnect the wiring harnesses from the back of the headlight assembly.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely came with the bulbs included (as most of our models do). This saves you time, as you can move right to installation of the new assembly!
Step 5: Connect the wiring harnesses to the back of the new headlight assembly.
Step 6: Slide the new assembly into the vehicle, taking care to line up all of the retaining tabs.
Step 7: Secure the headlight assembly into place by tightening the 10mm retaining bolts.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: