Step 1: Remove the small, triangular trim panel that covers the mirror's mounting point. It is located on the interior of the vehicle.
NOTE: If you have a manual mirror, you can simply remove the 10mm retaining bolts, remove the mirror, and mount your new one. However, if you have a power mirror, proceed to Step 2.
Step 2: Using the flathead screwdriver (and towel to prevent scratching), remove the trim and control panels, disengage the wiring harnesses, loosen and remove the retaining screws, and with the putty knife, gently pry the interior door panel away from the door frame.
Step 3: Disengage the mirror's wiring harness, if you haven't already done so.
Step 4: Loosen and remove the three 10mm mirror mounting bolts.
Step 5: Connect the wiring harness to the new side mirror.
Step 6: Mount the new mirror by tightening the three 10mm mounting bolts.
Step 7: Reattach all wiring harnesses (for the window control panel, etc.) and reattach the interior door panel by reversing the removal process.
Step 8: Reattach the trim panel that covers the mirror's mounting point.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: