Step 2: Loosen and remove the 2 Phillips retaining screws that secure the tail light assembly to the vehicle.
Step 3: You can now pull the tail light assembly from the vehicle.
Step 4: Disconnect the wiring harnesses to completely free the old tail light assembly.
NOTE: If you ordered your replacement tail light from Go-Part.com, it likely includes new sockets and bulbs, as many of our models do. This saves you a step, and allows you to move right to installation of the new assembly. However, in the event that your model does not include the new bulbs, simply turn the sockets counter-clockwise to pull the bulbs from the assembly and attach them to the new one!
Step 5: Connect the wiring harnesses to the new tail light assembly and use the guiding tabs to ensure proper assembly placement.
Step 6: Secure the tail light assembly by tightening the 2 Phillips retaining screws.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
