Step 2: Lift and remove the trim panel that spans the width of the trunk (near the trunk latch).
You will feel the retaining pins release.
Step 3: Twist and remove the retaining pin (1) that holds the trim panel in place (covering the tail light mount).
Step 4: Loosen and remove the 11mm mounting bolts (3).
Step 5: Disconnect the tail light's wiring harness.
Step 6: You can now remove the tail light assembly.
Step 7: Feed the new assembly's wiring harness through the opening in the vehicle's frame and mount the tail light by tightening the 11mm mounting bolts (3).
Use the guiding tabs on the tail light assembly to ensure proper placement and installation.
Step 8: Connect the tail light's wiring harness.
Step 9: Reattach the trunk liner by tightening the retaining pin.
Step 10: Reattach the trunk's trim panel.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: