Step 1: Using the flathead screwdriver, pry the small panel from the parking light face, exposing a Phillips screw.
Step 2: Remove the Phillips retaining screw.
Step 3: You can now pull the parking light assembly from the vehicle.
Step 4: Disconnect the wiring harness.
Step 5: Connect the wiring harness to the new parking light assembly.
Step 6: Using the guiding tab to ensure proper installation, tighten the component into place by tightening the Phillips screw.
Step 7: Cover the screw with the small face panel.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
