Step 2: Disengage the two retaining tabs above the headlight assembly.
Step 3: You can now pull the headlight assembly through the front of the vehicle.
Step 4: Disconnect the wiring harnesses from the back of the headlight assembly.
NOTE: If you purchased your replacement headlight assembly from Go-Part.com, it likely includes all new bulbs (as most of our models do)! This saves you time by allowing you to move directly to installation of your new assembly. However, if it didn't include the bulbs, they are easy to remove, as the sockets simply twist and pull out from the assembly.
Step 5: Connect the wiring harness to the back of the new headlight assembly.
NOTE: To make headlight adjustment/alignment easy, simply lengthen or shorten the alignment rod on the back of the assembly to match that of the old assembly.
Step 6: Insert the headlight assembly into the vehicle's chassis.
There are two large tabs on the back of the assembly. They fit into the large openings in the vehicle's chassis.
Step 7: Secure the new headlight assembly by re-engaging the two retaining clips.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
