Step 1: Remove the door panel using the Phillips screwdriver for 3 screws and the two 7mm bolts.
If you would like to see this process in greater detail, please refer to our door panel removal document.
Step 2: Remove the plugs that cover the 10mm bolts.
Step 3: Remove the three 10mm bolts that hold the side mirror in place.
NOTE: If you have power mirrors, you'll need to disconnect the wiring harness before removing the mirror.
Step 4: You can now remove the side mirror.
Step 5: Place the new side mirror in position and tighten the three retaining bolts.
If you have a power mirror, you can reconnect the electrical harness.
Step 6: Replace the insulators that cover the 10mm bolts.
Step 7: Begin reattaching the door panel.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: