Step 2: Lift the tabs to disengage the retaining clips. There will be 2 of them.
Step 3: You can now remove the headlight assembly.
Step 4: Disconnect the wiring harness from the headlight assembly.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments! Also, you may need to transfer the mounting bracket, but this process is also simple.
Step 5: Connect the wiring harness to the back of the new headlight.
Step 6: Secure the headlight by re-engaging the 2 retaining clips.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
