Step 2: Turn and remove the two retaining clips that hold the panel covering the radiator in place. Pull the panel from the vehicle.
Step 3: Lift and remove the two retaining clips that hold the headlight assembly in place.
These clips are located near the wiring harness plugs.
Step 4: You can now pull the headlight assembly from the vehicle.
Step 5: Disconnect the wiring harness on the back of the assembly.
NOTE: If you ordered your replacement headlight from Go-Part.com, it likely includes new sockets and bulbs, as most of our models do. This saves you an installation step! However, in case your particular model does not include new bulbs, simply turn the retaining ring counter-clockwise and pull the bulb/socket from the old assembly and insert it into the new one.
Step 6: Adjust the alignment pins on the back of the new headlight assembly to match the length of those on the old assembly.
This step ensures that your headlight is properly aligned when driving.
Step 7: Connect the wiring harness to the back of the new headlight assembly and mount it by re-engaging the two retaining clips.
Step 8: Reattach the protective cover by re-engaging the two mounting clips.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
