Step 2: Remove the retaining clips that hold the trunk liner in place. Peel the trunk liner back to expose the back of the tail light assembly.
Step 3: Remove the three 8mm retaining bolts that hold the tail light assembly in place.
Step 4: You can now pull the tail light assembly from the vehicle.
Step 5: Disconnect the wiring harnesses.
Step 6: Connect the wiring harnesses to the back of the new tail light assembly and push it into place.
Use the guiding tabs to ensure a perfect installation.
Step 7: Tighten the three 8mm retaining bolts to secure the tail light assembly.
Step 8: Reattach the trunk liner.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: