Step 1: Disconnect the coolant overflow hose from the radiator.
Step 2: Disconnect the cooling fan's wiring harness.
Step 3: Pull the wiring bundle that runs along the top of the radiator free of the small plastic clips that hold it to the radiator.
Step 4: Loosen and remove the two 10mm mounting bolts that secure the cooling fan to the radiator.
Step 5: Lift and remove the coolant overflow reservoir.
Step 6: Loosen and remove the 10mm bolts (2) that secure the radiator to the vehicle frame.
This step frees up some space for us to remove the fan assembly!
Step 7: You can now lift and remove the cooling fan assembly.
This may take a bit of maneuvering, as there isn't much space.
Step 8: Mount the new cooling fan assembly by tightening the two 10mm mounting bolts.
NOTE: Use the small tabs at the bottom of the assembly to ensure proper placement and installation.
Step 9: Tighten the radiator's 10mm mounting bolts (2).
Step 10: Secure the coolant overflow reservoir, and reattach the small hose to the radiator.
Step 11: Connect the cooling fan's wiring harness.
Step 12: Reattach the wiring bundle clips that secure the wiring to the radiator.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
