Step 2: Pry the clips that hold the wiring bundle to the radiator free from the casing. Also, pry the wiring bundle from the radiator shroud attachment.
Step 3: Loosen and remove the 10mm mounting bolts (3) that hold the fan assembly to the radiator.
Two are located on the top of the assembly, and the other is located near the bottom (center).
Step 4: Disconnect the cooling fan's wiring harness.
Step 5: You can now pull the cooling fan from the vehicle.
Step 6: Mount the new cooling fan by tightening the 10mm mounting bolts (3).
Step 7: Connect the cooling fan's wiring harness.
Step 8: Reattach the wiring bundle clips to the radiator casing.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: