Step 1: Loosen and remove the Phillips screw located just above the parking light/headlight mounting area.
Step 2: You can now pull the parking light assembly from the vehicle.
Step 3: Disconnect the wiring harness attached to the parking light.
NOTE: If you are replacing your parking light due to damage, it may make sense to replace the headlight assembly, as well. There are only a few more bolts to remove to do so, and it will never be easier than right now!
Step 4: Connect the wiring harness to the new parking light assembly.
Step 5: Secure the parking light by moving it into position and tightening the Phillips mounting screw.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
